neptune1 Posted January 14 Report Share Posted January 14 OK So its about time I have a demo CD, and I need to mark seperate trax. All I'm able to do right now is just burn one long track I'm technologically disinclined, for sure...Whats the easiest, best, and cost-free way to burn a halfway decent sounding demo? And what software should I use? And how do I seperate those trax?!? Thanx for any advice. Quote Link to comment Share on other sites More sharing options...
djmattreid Posted January 15 Report Share Posted January 15 you can do everything right in Nero:D Quote Link to comment Share on other sites More sharing options...
djdeanmasi Posted January 15 Report Share Posted January 15 Yes, he can do it in Nero but, he needs software to burn the actuall wave first. Come on Matt; u haven't been studying!neptune1, what are u using right now? Software in a computer or a stand alone burner? If it's a stand alone burner, after you record the mix (1 big long wave), take that mix on cd, put it into your cd drive and extract the audio off of it in Nero (saved onto your hard drive) & then u can seperate the tracks in Nero. That's one route!Or, instead of using Nero, u can use Sound Forge! THAT'S WHAT I RECOMMEND!If you are allready recording the mix into your computer & onto your hard drive, what software are u using? I use & recommend Sound Forge 6.0. Record the mix right into the computer & onto your hard drive using Sound Forge 6.0. Then, when u want to seperate tracks, in Sound Forge, highlight the start of the track to the end of the track, hit copy, then, hit new page, then, hit paste. Then, save that individual track by itself. Do that with every track. When you're done, go into your cd burning program, add all of the tracks in order & burn using disc at once & make sure there is no (0 seconds) pause (you'll find this in the properties menu of each track) in between every track & proceed with the burn! SIMPLE! I'll get more into detail when u respond back & let me know where your at, what u know, & what you're allready using. Quote Link to comment Share on other sites More sharing options...
ADV Posted January 15 Report Share Posted January 15 Originally posted by neptune1 OK So its about time I have a demo CD, and I need to mark seperate trax. All I'm able to do right now is just burn one long track I'm technologically disinclined, for sure...Whats the easiest, best, and cost-free way to burn a halfway decent sounding demo? And what software should I use? And how do I seperate those trax?!? Thanx for any advice. Sonic Foundry CD Architect 5.0 Musicians Friend has it for $149. It's the best way to make mixed CDs.http://www.musiciansfriend.com/srs7/sid=030115083129167206185196151703/search/g=home/detail/base_id/100594 Quote Link to comment Share on other sites More sharing options...
katari Posted January 15 Report Share Posted January 15 Everyone has their own way of making a demo.I first connect the mixer output to my laptop and record the entire set as wav file. I use an old software: ACIDWAV.Then I use a trial version of a CD burner program called CDRWIN. It allows me to create a cue sheet where I can enter the lengths of each of the tracks. So I don't have to cut and paste, I simply load the entire set with the cue sheet. Then when I record it automatically sets the tracks.I e-mailed the creators of the software to purchase it, but they didn't respond. The only limiation of the trial version is that it records at 1X. So I'm happy with my method, but others work too.Let me know if you want a copy of the softwares I mentioned. Again, both are trial versions but they do what I need. Quote Link to comment Share on other sites More sharing options...
djmattreid Posted January 16 Report Share Posted January 16 you wanna fight dean masi. ill give everybody sweat and put it on kazaa. lol and then maybe ill teach you a lesson or two. :laugh: Quote Link to comment Share on other sites More sharing options...
JimmyZ Posted January 17 Report Share Posted January 17 I believe I can help you ......Instructions On How To Split A Large Mp3 Track And Burn To Cd With No Gaps! ------------------------------------------------------------------------------------------------------------------------- Here is a detailed instruction post on how to do it. Mods, feel free to close it if need be, but please don't delete. Then people will not have to keep posting on how to do it, and if they do, this thread can be linked to... so: you have downloaded a hundred meg file from somewhere, and it's all as one track (the seperate tracks are mixed within this file) you want to burn this file to a cd, but have the break points in it so you can go to specific tracks etc. What do you do: First, listen to the track, and see where each new track starts in the mix. Write down this time. Then you will need to create a cue sheet. To do this, open a notepad document. then put this as the header: code:-------------------------------------------------------------------------------- PERFORMER "Artist here" TITLE "title of mix" FILE "C:\FILELOCATION\FILENAME.mp3" mpeg3 -------------------------------------------------------------------------------- Then for each track, you need to use this format: code:-------------------------------------------------------------------------------- TRACK 01 AUDIO TITLE "title of track" PERFORMER "track artist here" INDEX 01 00:00:00 -------------------------------------------------------------------------------- you need not edit the title and performer, but if you want to use cdtext, then you should. Anyway, where it says INDEX 01 00:00:00 this is the first track, so the 00:00:00 means that this track starts at that time 0 seconds into the disk. then we add track two like this: code:-------------------------------------------------------------------------------- TRACK 01 AUDIO TITLE "title of track" PERFORMER "track artist here" INDEX 01 00:00:00 TRACK 02 AUDIO TITLE "title of track" PERFORMER "track artist here" INDEX 01 04:03:20 -------------------------------------------------------------------------------- Notice that the track # has changed to two (because it is the second track) and that the index time is not 04:03:20 This means that track 1 finishes (and track 2 starts) at 4 minutes, three seconds and 2 tenths of a second into the mix. Then you add track three like this: code:-------------------------------------------------------------------------------- TRACK 01 AUDIO TITLE "title of track" PERFORMER "track artist here" INDEX 01 00:00:00 TRACK 02 AUDIO TITLE "title of track" PERFORMER "track artist here" INDEX 01 04:03:20 TRACK 03 AUDIO TITLE "title of track" PERFORMER "track artist here" INDEX 01 08:45:21 -------------------------------------------------------------------------------- the same applies for track three as above. You just add all the tracks like this, until you have them all done. when you are finished, your cuesheet should look similar to this, except the timings (and maybe performer, title) will be different - to suit your mix code:-------------------------------------------------------------------------------- PERFORMER "Artist here" TITLE "title of mix" FILE "C:\FILELOCATION\FILENAME.mp3" mpeg3 TRACK 01 AUDIO TITLE "title of track" PERFORMER "track artist here" INDEX 01 00:00:00 TRACK 02 AUDIO TITLE "title of track" PERFORMER "track artist here" INDEX 01 04:03:20 TRACK 03 AUDIO TITLE "title of track" PERFORMER "track artist here" INDEX 01 08:45:21 -------------------------------------------------------------------------------- Here is a cuesheet for a catecrasher cd I have: code:--------------------------------------------------------------------------------PERFORMER "Unknown Artist" TITLE "Unknown Title" FILE "C:\My Documents\Range.wav" WAVE TRACK 01 AUDIO TITLE "Track01" PERFORMER "Unknown Artist" INDEX 01 00:00:00 TRACK 02 AUDIO TITLE "Track02" PERFORMER "Unknown Artist" INDEX 01 06:11:52 TRACK 03 AUDIO TITLE "Track03" PERFORMER "Unknown Artist" INDEX 01 11:21:47 TRACK 04 AUDIO TITLE "Track04" PERFORMER "Unknown Artist" INDEX 01 14:56:67 TRACK 05 AUDIO TITLE "Track05" PERFORMER "Unknown Artist" INDEX 01 19:02:60 TRACK 06 AUDIO TITLE "Track06" PERFORMER "Unknown Artist" INDEX 01 24:27:17 TRACK 07 AUDIO TITLE "Track07" PERFORMER "Unknown Artist" INDEX 01 30:31:72 TRACK 08 AUDIO TITLE "Track08" PERFORMER "Unknown Artist" INDEX 01 36:52:45 TRACK 09 AUDIO TITLE "Track09" PERFORMER "Unknown Artist" INDEX 01 43:12:25 TRACK 10 AUDIO TITLE "Track10" PERFORMER "Unknown Artist" INDEX 01 48:04:42 TRACK 11 AUDIO TITLE "Track11" PERFORMER "Unknown Artist" INDEX 01 53:52:37 TRACK 12 AUDIO TITLE "Track12" PERFORMER "Unknown Artist" INDEX 01 57:21:15 TRACK 13 AUDIO TITLE "Track13" PERFORMER "Unknown Artist" INDEX 01 62:15:12 TRACK 14 AUDIO TITLE "Track14" PERFORMER "Unknown Artist" INDEX 01 68:34:27 TRACK 15 AUDIO TITLE "Track15" PERFORMER "Unknown Artist" INDEX 01 73:43:72 -------------------------------------------------------------------------------- then you need to go file, save as In the drop-down bottom at the bottom, change to all files types (will probably say .txt text file etc at first). Then call the file cuesheet1.cue <<very important to have the .cue on the end!!>> Save this file. THEN: Download a copy of cdrwin if you haven't already got it. If you want the URL to download it from, or need the crack file, please contact me on the details at the bototm of this page. Anyway, once installed and registered, open cdrwin, and click the record a disk icon (top row, far left) Then click "load cuesheet" A file browser box wil appear, and you need to locate the cue sheet we created earlier. It will say "compiliing cue sheet" then if everything has gone to plan, it will be ready to record! Then click "start recording" [fourth button down] Your cd should then burn!!! Quote Link to comment Share on other sites More sharing options...
carusomaas12 Posted January 17 Report Share Posted January 17 Originally posted by djdeanmasi Yes, he can do it in Nero but, he needs software to burn the actuall wave first. Come on Matt; u haven't been studying!neptune1, what are u using right now? Software in a computer or a stand alone burner? If it's a stand alone burner, after you record the mix (1 big long wave), take that mix on cd, put it into your cd drive and extract the audio off of it in Nero (saved onto your hard drive) & then u can seperate the tracks in Nero. That's one route!Or, instead of using Nero, u can use Sound Forge! THAT'S WHAT I RECOMMEND!If you are allready recording the mix into your computer & onto your hard drive, what software are u using? I use & recommend Sound Forge 6.0. Record the mix right into the computer & onto your hard drive using Sound Forge 6.0. Then, when u want to seperate tracks, in Sound Forge, highlight the start of the track to the end of the track, hit copy, then, hit new page, then, hit paste. Then, save that individual track by itself. Do that with every track. When you're done, go into your cd burning program, add all of the tracks in order & burn using disc at once & make sure there is no (0 seconds) pause (you'll find this in the properties menu of each track) in between every track & proceed with the burn! SIMPLE! I'll get more into detail when u respond back & let me know where your at, what u know, & what you're allready using. I agree to use Sound Forge for splitting one of your mixes. I use Sonar to record and Sound Forge to split as discussed above...pretty easy to do also and you can get to the exact point you want to split, vs other programs which might split a long track in even intervals. hey djdeanmasi....heard you and mello spin at the Groove Lounge in Long Branch these days? hey does Mike Canberg own/run that place? curious as he was one of my pledge brothers in college and i now hear he either owns or is a partial owner there. Quote Link to comment Share on other sites More sharing options...
djmikedr Posted January 18 Report Share Posted January 18 Simplist way:Record direct to Minidisc, and add track marks where you like. Then clone to a CD. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.