Jump to content
Clubplanet Nightlife Community

2004 M3


Keith86

Recommended Posts

Yes that is correct.

Ok, its been awhile since I did this but...

How to use Launch Control---

1-Turn off DSC and activate manual shift.

2-There will now be an extra spot on the Drivelogic display. Crank up the DL until all spots are full on the display

3-Push shift knob up to + position and hold it

4-Push accelerator pedal down to the floor. The car should idle and not move.

5-Let go of the shift knob and hold on.

Important--Have plenty of room in front of you and to the sides. The cars back end tends to breakaway when you do this. Remember SHIFT GEARS!!! The first shift comes quick.

Link to comment
Share on other sites

Yes that is correct.

Ok, its been awhile since I did this but...

How to use Launch Control---

1-Turn off DSC and activate manual shift.

2-There will now be an extra spot on the Drivelogic display. Crank up the DL until all spots are full on the display

3-Push shift knob up to + position and hold it

4-Push accelerator pedal down to the floor. The car should idle and not move.

5-Let go of the shift knob and hold on.

Important--Have plenty of room in front of you and to the sides. The cars back end tends to breakaway when you do this. Remember SHIFT GEARS!!! The first shift comes quick.

Link to comment
Share on other sites

I tried that but it will only let me rev up to about 2000 maybe 2200 rpms i get a ok start..maybe i did it wrong ...I feel the best way to start is when i just rev it quickly without using the stick then punch it and it rips like crazy

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...